Home › Codes › SPN 629 › FMI 13

SPN 629 FMI 13

Controller #1 — Out of calibration.
The component or the controller's calibration for it is not within the expected range.

What the SPN covers: The engine controller itself has detected an internal problem. More on SPN 629.

What FMI 13 usually points to: A replaced part that needs a calibration or learn procedure, wrong software, or a worn component. More on FMI 13.

Severity

HIGH — limit use, diagnose now

Can range from minor to no-start. Check power and grounds before blaming the ECM.

Likely causes

  1. Internal ECM fault
  2. Corrupted or interrupted programming
  3. Poor power or ground supply
  4. Water intrusion

Checks & fixes (easiest first)

  1. Check ECM power and ground
  2. Check for software updates or a failed reflash
  3. Inspect connectors for water

FAQ

What does SPN 629 FMI 13 mean?

Controller #1 — out of calibration. The component or the controller's calibration for it is not within the expected range.

Is SPN 629 FMI 13 serious?

Can range from minor to no-start. Check power and grounds before blaming the ECM.

What should I check first for SPN 629 FMI 13?

Check ECM power and ground; Check for software updates or a failed reflash; Inspect connectors for water.